CANON PIXMA TS5150 SETUP

Home/CANON PIXMA TS5150 SETUP
CANON PIXMA TS5150 SETUP 2022-06-24T10:57:22+00:00

CANON PIXMA TS5150 SETUP – COMPLETE GUIDE

Canon PIXMA TS-5150 is an all-in-one wireless inkjet printer that comes with a wide range of connectivity options, including Bluetooth. It is an ideal choice for home and office printing needs.This all-in-one printer is easy to set up. However, some users may face difficulties in performing the same. The next section explains how to perform the Canon PIXMA TS5150 setup for the first time.

The entire setup process includes five steps:

  • Unpacking the printer (Skip this step if you have already unpacked your printer)
  • Turning on the printer
  • Installing the ink cartridges
  • Loading paper
  • Installing the printer driver
Canon Pixma Ts5150 Setup

Setting Up The Canon Pixma Ts-5150 Printer For The First Time

Step 1: Unpacking The Printer

  • Remove the Canon PIXMA TS-5150 printer from the outer packing cover and place it on a table.
  • Now, gently remove the orange packing tapes from the printer.
  • Remove the packing cover from the scanner glass.
  • Raise your printer’s top cover and look for the packing and protective material inside it.
  • Remove and recycle the packing materials properly.

Step 2: Turning On The Canon Printer

The second step of the setup process is to turn on the Canon PIXMA TS-5150 printer.

  • Get the power cord of your printer.
  • Plug the cord’s one end (which is small or fits the printer’s Power port) into the printer.
  • Connect the other end of your printer’s power cord to an active power outlet.
  • Now, raise your printer’s Operation Panel.
  • Press the ON button on the panel to turn on your printer.
  • Wait for the printer’s Power light to become stable.
  • Once it becomes stable, select Next > Agree > OK to begin the printer setup.

Continue reading the given below steps to perform Canon Pixma ts5150 setup.

Step 3: Installing The Ink Cartridges

  • Open your printer’s ink cartridge access door.
  • Wait for the FINE cartridge holder to become stable.
  • Meanwhile, unpack the FINE ink cartridges that are shipped along with the printer.
  • Make sure that the protective tapes from the cartridges are removed.
  • Now, open the cartridge holder cover. (Note: While handling the cartridges, make sure not to touch their nozzle contacts.)
  • Insert the unpacked color ink cartridge on the left-hand side of the holder and the black ink cartridge on the right.
  • After installing the cartridges, close the holder cover followed by the ink cartridge access door of your printer.

Step 4: Loading Paper

  • Remove the paper cassette completely from the printer.
  • Adjust the width guides properly.
  • Load a stack of photo, A4, or letter paper into the cassette.
  • Move the guides towards the paper.
  • Make sure that the paper is not overloaded in the cassette.
  • Place the cassette back into the printer.
  • Now, open your printer’s output tray extension.

Read the below steps to complete Canon Pixma Ts5150 Setup process.

Step 5: INstalling The Printer Driver

  • Press the OK button on your printer’s operation panel if the message “Start connection preparation” is displayed on the printer display.
  • For USB: Connect the printer directly to your computer using the USB cable.
  • For Wireless: Connect the printer to a wireless network using its control panel. After doing it, connect your computer (on which you wish to install the printer) to the same network (to which the printer is connected) over a wired or wireless connection.
  • Open the printer driver file.
  • Select the Connection Setup option as per your preferences when prompted.
  • Install the printer driver to complete the Canon PIXMA TS-5150 printer setup process.
  • After installing the printer driver on your computer, check whether the setup is done correctly by printing a test page.

Now you have completed Canon Pixma Ts5150 setup process sucessfully. If you have any queries, you can get back to us for remote assistance. 

Quick Printer Support