Canon Pixma Pro 10 Setup Guide | Canon Pro 10 Wireless Setup

Canon Pixma Pro 10 Setup Jack 2022-06-24T10:53:30+00:00

CANON PIXMA PRO 10 SETUP SUPPORT

Hassle-free and easy printing with the Pixma Pro series. Optical Disk printing, a dynamic feature that some printers lack, is embedded in this printer series. Get instant support for Canon Pixma Pro 10 setup & troubleshooting process.

How to Setup Canon Pixma Pro 10 Printer?

Place your Canon Pixma Pro 10 printer on a flat surface.

Clear all the packaging material from the inside and outside of the printer.

Plug the power cord into the printer and the other end into a wall outlet.

Tap the ON button to turn the printer on for the Canon Pixma Pro 10 setup process.

Retract the paper output tray and then open the top cover.

You can see the printhead holder moving.

Raise the Printhead lock lever until it halts.

Unpack the new printhead. Remove the orange protective cap from it.

Fix the printhead into the printhead holder. Lower the lever.

Now, unpack the ink tank. Remove the orange protective cap.

Insert the ink tank into the matching color slot and push it inside.

Ensure that the lamps on the printhead and the ink tank are lit.

Canon Pixma Pro 10 Driver

A driver mediates the communication between the printer and your device. It is essential to keep it updated and secure for experiencing an uninterrupted service. The Canon Pixma Pro 10 driver can be downloaded from the manufacturer’s site. Select the driver according to the version of your operating system.

Canon Pixma Pro 10 Manual

The printer comes with a user guide. It includes all the details about the printer and manufacturer. The instructions for Canon Pixma Pro 10 setup to fixing issues are given in detail in the manual. You can also download the Canon Pixma Pro 10 manual in the PDF format from the manufacturer’s site or using the Manual Download button provided below.

Canon Pixma Pro 10 Driver Download

Go to the manufacturer’s site and enter the model number of your product.
Select the Get Product Support tab and click the Drivers and Downloads tab.
Change the operating system to match with that of your computer.
Select the driver and software packages that you want to install.
Click the Canon Pixma Pro 10 Driver Download option. Wait for the files to download.
Alternately, to get the driver in just one step, give a click on the Driver download button provided below.
If your computer runs on Windows, the driver will save with the .exe extension. On Mac, the file saves with the .dmg extension. Get instant assistance for Canon Pixma Pro 10 setup & troubleshooting process.

Canon Pixma Pro 10 Driver Installation

If you have the setup disc, insert into the computer’s hard drive.
The installer should begin automatically. If it doesn’t start, double-click the setup disc icon on the My computer screen.
In case you have downloaded the file, locate the downloaded setup file to begin the installation.
When the license agreement screen opens, select Agree.
Read and appropriately respond to the prompts displayed on the screen to proceed with the installation.
If prompted, select the destination where you want to save the printer driver and click Continue.
If an authentication screen opens, provide the administrator credentials and select the Install Software option.
Click Close once the installation completes. Reach us to get instant support for Canon Pixma Pro 10 setup process.

Canon Pixma Pro 10 Wireless Setup

First, power on your printer and let it complete its initialization process.
Press the Wi-Fi button on the operation panel until the button flashes blue.
Now go to your router and press its WPS button (within 2 minutes).
The Wi-Fi button keeps flashing blue while the printer searches for the network.
Once it connects to the network, the blue lamp will stop flashing and remain lit.
Install the driver for configuring the printer for the wireless connection setup.
Proceed with the steps below for connecting the printer to a wireless network by the Standard connection method.
Insert the setup CD into your computer’s CD drive. Proceed with the prompts on the installer setup screen.
When the Connection Method Selection screen appears, select the Network Connection option.
Choose the Wireless Connection option as the network connection type for the Canon Pixma Pro 10 wireless setup process.
Ensure that your printer and router are turned on. Return to the installer and select the Connect to the network option.
Read and respond appropriately to each prompt screen to set the printer on a wireless network. For further Canon Pixma Pro 10 setup related guidance, just reach us.

How To Print Using Canon Pixma Pro 10 Printer?

The Canon Pixma Pro 10 printer produces high-quality printouts at a resolution of 4800×2400 dpi.

Ensure that your Canon printer is turned on and connected to the computer.
Open the paper support and then retract the output tray.
Pull the tray extension out and open the feed slot cover.
Move the paper width guides apart and then place the paper stack in the tray. Ensure that the print side of the paper faces you.
Adjust the guides and close the feed slot cover.
Locate the item that you want to print, select the item, and open it with a suitable application.
Click the File menu and then select the Print option to open the Print dialog box.
Specify the printer and number of copies. Click Print.
Set the paper size, orientation, media type, quality, and paper source as per your requirement.
Click the Print tab again. The printer will print your document with the specified settings.

Canon Pixma Pro 10 AirPrint setup

AirPrint is one of the mobile printing solutions which enables you to print from an iOS or Mac device. It does not require special software or driver installation.

Ensure that your printer and Apple device is connected to the same network and the Canon Pixma Pro 10 setup is done.
Tap the Operation icon and select the Print option.
Select the Print option. Choose the printer name.
If you want to print a PDF file, select Range and then choose All Pages.
Set the number of copies and select other print settings.
Enable the Duplex Printing option if you want to print on both sides of a page.
Tap the Print option.
The printer will print the document with the specified settings.

Canon Pixma Pro 10 Ink Cartridge Replacement

When the installed ink tank runs low on ink, the alarm light on the printer flashes. Refer to the step-by-step instructions for replacing the ink tank given below.

Power up your Canon printer and lower the output tray.
Raise the top cover and then tap the Resume and Cancel button.
Wait while the printhead holder moves to the replacement position.
Unpack the new ink tank. Do not forget to remove the orange cap from it for the Canon Pixma Pro 10 ink cartridge replacement process.
Now, find the ink tank for which the lamp is flashing.
Push the tab against the ink tank and lift the ink tank.
Insert the front end of the new ink tank into the printhead at a slant position.
Press the top of the tank after inserting it into the printhead holder so that it is held firmly. The lamp for the replaced ink tank should be lit.
Close the top cover. The printer will automatically mix the ink.
Wait for the Power light to become solidly lit. Reach our tech experts to get quick assistance for Canon Pixma Pro 10 setup process.

Canon Pixma Pro 10 Printhead Cleaning

To clean the printhead directly from the operation panel, press the Resume/Cancel button until the Power lamp flashes.
The printer will start cleaning the printhead.
Print the Nozzle Check Pattern page to check the condition of the printhead. For this, hold the Resume/Cancel button until the Power lamp flashes twice.
Examine the pattern and run a deep cleaning if the patterns are defective.
To run a printhead cleaning from the computer, start the Canon IJ Printer Utility and select the Cleaning option from the pop-up menu.
Click on the Cleaning icon. Now, go to your printer and make sure it is powered on.
Click OK. The printhead cleaning starts.
Print the Nozzle Check Pattern page and proceed with the second stage of cleaning.

Canon Pixma Pro 10 Printing Directly With The Pictbridge Compliant Device

Power on your Canon Pixma Pro 10 printer.
Load enough paper into the rear tray.
Do not turn on your PictBridge compliant device.
First, connect the device to the printer using a USB cable. The invention will automatically turn on.
The device should display a message stating that the printer is connected.
Make use of the menu option on the LCD of the device to change the print settings.
Set the size and type of paper that you have loaded into the printer.
Proceed to print, once the Canon Pixma Pro 10 setup is done.

Canon Pixma Pro 10 printing with Pixma Cloud Link

You can connect your device to a cloud service such as CANON iMAGE GATEWAY, Evernote, or Twitter and print documents and photos securely over the cloud.

Register with the IJ Cloud Printing Center setup.
Use the service login URL to open the login screen for Cloud Link.
Provide the essential details to log in to the window.
Select the app you want to use on the main screen.
Log in by typing the username and password that you have created while registering the printer to the IJ Cloud Printing Center setup.
Choose an album from the list of albums displayed.
Find the image that you wish to print, select it, and click Next.
Change the print settings and select Print. The printer starts printing the image, once the Canon Pixma Pro 10 setup process gets completed.

Canon Pixma Pro 10 printing with Pixma Cloud Link

Canon Pixma Pro 10 Troubleshooting

The common problems that occur on the printer are paper jam error, connection issues, cartridge errors, etc. You can find the detailed troubleshooting steps in the manual. Step-by-step instructions for troubleshooting the printer issues are given below.

Canon Pixma Pro 10 Won’t Print

Ensure that the power cord from your computer is securely connected to the wall outlet & the Canon Pixma Pro 10 setup is done.
Check if the printer and your computer are connected.
If you have established a USB connection, plug out the USB cable and examine it. Replace the cable if it is damaged.
If you have set the printer on a wireless network, ensure that the network is stable. Try moving the printer close to your router.
Close the disc tray guide if it is opened and then press the Resume/Cancel button on the printer.
Check if the manual feed slot cover is closed.
Make sure the print settings match with that of your print job.
Ensure that the printer is set as the default printing source.
If the issue persists, update the printer driver.
Restart your computer and printer. Try to print.

Canon Pixma Pro 10 Airprint Troubleshooting

Ensure that your iOS device is running on version 4.2 and later.
Power on your Canon printer if it is turned off.
Turn off the printer and then power it on. Check if the issue is resolved.
Ensure that the network strength is strong.
If the issue persists, try printing with your printer driver.
If you are not able to print, uninstall the printer driver.
Reinstall the most recent version of the driver from the manufacturer’s site.
Try updating the printer firmware. Reach our experts to get instant assistance for Canon Pixma Pro 10 setup & troubleshooting related process.

Canon Pixma Pro 10 Paper Jam

Press the Resume/Cancel button on the operation panel to cancel any print job in progress. Power off the printer if it is turned on.
Plug out the power cord from the wall outlet.
Raise the top cover and retract the output tray.
If there is any jammed paper under the printhead holder, hold the top of the holder and move it to a side.
Hold the jammed paper using both your hands and pull it out.
Take care not to tear the paper.
Check the output slot and manual feed tray and remove any foreign object from it.
Contact the service center if the paper jam error persists even after removing the paper from the inside of the printer.

Canon Pixma Pro 10 Not Connecting To The Network

Ensure that the printer is turned on. Verify that the Wi-Fi lamp is lit on the printer.
If you are using the Canon IJ Network Tool, launch it and select the Update option. The tool searches for the printer again.
Check if the network settings on the printer and your router are identical.
Clear any obstructions blocking the network connection and move the printer close to the router.
If you have enabled any firewall software, disable it temporarily. The software may block the communication between the printer and your router.
For a wired LAN connection, check if the wired LAN setting is enabled on the printer driver. Print a Network Setting Information page to check the settings.
Press the Resume/Cancel button on the operation panel. Hold it until the Power lamp flashes six times.
Check the settings and modify them if required. Contact our technical experts to get the complete support for Canon Pixma Pro 10 setup process.

Related Queries: Canon Printer Setup

Canon Pixma ts9170 Setup

Canon Pixma ts8170 Setup

Canon Pixma g2000 Setup

Canon Pixma g2010 Setup