CANON PIXMA MG3650 SETUP 2022-06-24T10:46:57+00:00


Canon Pixma MG3650 is a versatile printer ideal for home and office requirements. It is recommended for both indoor and outdoor printing. This printer supports wireless printing so that you don’t need to run behind cables anymore. To know the Canon Pixma MG3650 Setup process, read this article till the end.

Canon Pixma MG3650 Setup

Unpack Your Printer

  • Unpacking is the first step of setting up a printer. Take it out from its carton and remove all the included accessories.
  • Your package includes the Canon Pixma MG3650 printer, ink cartridges, getting started guide, and an installation CD.
  • Take out all the protective materials and the packing tapes from your printer and its components. Make sure that you haven’t left any protective materials inside your printer. If you do so, you will end up with an error code during the printer setup.
  • Check whether you have received all the items without any defect.

Connect Your Printer To An Electrical Outlet

  • Take the power cord you received and connect it between your printer and an electrical outlet.
  • Press the Power button on your Canon printer to turn it on. Now the Power LED will start to glow up.
  • If the Alarm LED on your printer starts to flash, you need to check whether you have left any packing items inside the printer.

Install The Cartridges

  • Open your printer’s front cover and get ready to install the cartridges.
  • Unpack the ink cartridges you received and take out the orange tapes.
  • Insert the Black cartridge into the right holder and the Color cartridge into the left holder.
  • Press each cartridge until it snaps in its place.
  • Finally, close the front cover of your printer.

Load Paper

  • Extend the paper cassette and slide the width guides to the extreme ends.
  • Take a paper stack and fan the sheets neatly.
  • Align the edges and load the stack into the paper cassette.
  • Adjust the guides to fit the sheets and insert the paper cassette completely into the printer.
  • Finally, extend the output tray.

Continue reading the given steps to know Canon Pixma Mg3650 Setup process.

Connect Your Printer To Your Computer

  • Insert the printer driver CD into the CD drive of your computer and install the printer driver by following the on-screen instructions.
  • If your computer doesn’t have a CD drive, you can get the printer driver from the official website of Canon.
  • Visit Canon’s website from a browser you prefer. Enter your printer model (Canon MG3650) and download the printer driver recommended for your Operating System.
  • Once the download gets over, locate the file in the Downloads folder and run the setup file.
  • Choose Yes if you see the User Account Control dialog box.
  • When the license agreement screen appears, accept all the terms and conditions.
  • When prompted, choose the connection method you prefer and connect your printer and the computer accordingly.
  • If you have chosen the wireless connection method, make sure to connect your printer to the same network to which your computer is connected.
  • For USB connection, make sure to connect the USB cable only when prompted.
  • Follow the instructions that appear on the screen and complete the installation process.

Now you have seen Canon Pixma MG3650 setup process. If you have any queries, you can get back to us for remote assistance. 

Quick Printer Support